UA600 Antenna Rack Mount Kit
The Shure Model UA600 Antenna Rack Mount Kit allows antennas to be installed on the front of a rack-mounted Shure wireless receiver. Each kit includes the following:
|(2) Bulkhead adapters
|(2) 1/2” internal-tooth lockwashers
|(2) 1/2-28 hex nuts
|(2) RG-58/U antenna cables
- Remove the bulkhead plugs from the front panel.
- Install the bulkhead adapters as shown.
- Remove the antennas from the back of the unit and reconnect them to the bulkhead adapters on the front.
- Use the supplied cables to connect the antenna inputs on the back panel of the receiver to the bulkhead adapters.