PSM® 1000

Connecting to an AMX or Crestron System

Conexão: Ethernet (TCP/IP; selecione “Client” no programa AMX/Crestron)

Porta: 2202

The following messages can be used to communicate with an AMX or Crestron unit across an Ethernet connection.

Message Types

The control system sends the following command messages:

SET Sent from the control system to the Shure device to change the value of a parameter. Used to set the parameter to a specific value. Once a SET command is sent, the Shure device sends back a REPORT string with the current resultant setting.
GET Gets the current value of a parameter. Once a GET command is sent, the Shure device will send back a REPORT string with the current setting.
REPORT Reports the current value for a parameter. The REPORT string is sent from the Shure device to the Control system in response to a SET or GET command. The REPORT string is also sent when the value of the parameter is changed on the Shure device.

Syntax

All messages sent and received are ASCII characters.

  • Each message begins with a "<" followed by a space.
  • Each message ends with a space followed by an ">"
  • Each message is terminated by a carriage return and line feed (CRLF). The control system may need to enter the hex value, equivalent to 0x0D0A. Please see the control system user guide for information on entering carriage returns.
  • If the message is a box parameter, there should be no channel number in the string.

Example Messages

Example Messages for Channel Parameters

  • < GET 1 FREQUENCY >
  • < REPORT 1 FREQUENCY 578000 >

Example Messages for Box Parameters

  • < SET DEVICE_NAME Shure >
  • < REPORT DEVICE_NAME Shure >

Tabela de Respostas de Comando

COMANDO RESPOSTA
Exibir Nome do Transmissor GET DEVICE_NAME REPORT DEVICE_NAME vvvvvvvv
Definir Nome do Canal SET x CHAN NAME vvvvvvvv REPORT x CHAN_NAME vvvvvvvv
Obter Nome do Canal GET x CHAN NAME REPORT CHAN_NAME vvvvvvvv
Definir Nível de Áudio SET x AUDIO_IN_LVL vvvv REPORT x AUDIO_IN_LVL vvvv
Exibir Nível de Áudio GET x AUDIO_IN_LVL REPORT x AUDIO_IN_LVL vvvv
Definir Grupo e Canal do Transmissor SET x GROUP_CHAN gg,cc REPORT x FREQUENCY vvvvvvvvvvv 
REPORT x GROUP_CHAN gg,ccvvv
Exibir Grupo e Canal do Transmissor GET x GROUP_CHAN REPORT x GROUP_CHAN gg,cc
Definir Frequência do Transmissor SET x FREQUENCY vvvvvvvvvvv REPORT x FREQUENCY vvvvvvvvvvv 
REPORT x GROUP_CHAN --,--vvv
Exibir Frequência do Transmissor GET x FREQUENCY REPORT x FREQUENCY vvvvvvvvvvv
Definir Nível de RF de TX SET x RF_TX_LVL vvvvvv REPORT x RF_TX_LVL vvvvvv
Exibir Nível de RF de TX GET x RF_TX_LVL REPORT x RF_TX_LVL vvvvvv
Definir Emudecimento de RF SET x RF_MUTE vvvv 
1 = mudo, 0 = não mudo REPORT x RF_MUTE vvvv 
1 = mudo, 0 = não mudo
Exibir Emudecimento de RF GET x RF_MUTE 
1 = mudo, 0 = não mudo REPORT x RF_MUTE vvvv 
1 = mudo, 0 = não mudo
Definir Modo TX de Áudio SET x AUDIO_TX_MODE vvvv 
1 = mono, 2 = ponto a ponto 3 = estéreo REPORT x AUDIO_TX_MODE vvvv 
1 = mono, 2 = ponto a ponto, 3 = estéreo
Exibir Modo TX de Áudio GET x AUDIO_TX_MODE REPORT x AUDIO_TX_MODE vvvv 
1 = mono, 2 = ponto a ponto, 3 = estéreo
Definir Nível de Linha da Entrada de Áudio SET x AUDIO_IN_LINE_LVL vvvv 
0 = desligado (Aux), 1 = ligado (Linha) REPORT x AUDIO_IN_LINE_LVL vvvv 
0 = desligado (Aux), 1 = ligado (Linha)
Exibir Nível de Linha da Entrada de Áudio GET x AUDIO_IN_LINE_LVL REPORT x AUDIO_IN_LINE_LVL vvvv 
0 = desligado (Aux), 1 = ligado (Linha)
Definir Taxa de Medição SET x METER_RATE vvvvvvvvvvv 
0 = desligado, valor em milissegundos REPORT x METER_RATE vvvvvvvvvvv 
0 = desligado, valor em milissegundos
Exibir Taxa de Medição GET x METER_RATE REPORT x METER_RATE vvvvvvvvvvv 
0 = desligado, valor em milissegundos
Nível do Medidor de Áudio REPORT x AUDIO_IN_LVL_L vvvvvvvvvvv REPORT x AUDIO_IN_LVL_L vvvvvvvvvvv 
REPORT x AUDIO_IN_LVL_R vvvvvvvvvvv