Digital Audio Processor with feedback reducer, 19" metal housing, 1U with 2 inputs and 2 outputs; line level, each with balanced XLR and Euro block connectors. LED metering for all audio levels, active filters, status of filters, preset, and power. Programmable via a RS-232 interface with the included Windows software (Live and Design Mode). 16 user programmable presets, including three preprogrammed presets. Contact closures to remotely change preset, adjust gain and mute channels. AMX/Crestron control functionality. Different security levels. Free signal routing of inputs to outputs with gain control and switchable polarity. Muting of individual or all inputs and outputs. Free insert of the follow-ing processor blocks: - Graphic EQs (10 and 30 band) - Parametric EQs (3, 5, 7, or 10 band with adjustable width) - DFR (Digital Feedback Reducer) with notch filters (5, 10, or 16 band) - AGC (Automatic Gain Control) - Delay up to 2s (a total of 10s, 21µs steps) - Adjustable Compressor/Limiter (including look ahead peak limiter) - Gate/Expander - Crossover (2 ways with adjustable slopes and types) - Splitter - Ducker Frequency Response: 20 Hz - 20 kHz (+/- 1 dB) Sample Rate / Conversion: 48 kHz/24 Bit Dynamic Range: min. 110 dB(A) (20 Hz - 20 kHz) Clipping Level In: min. 24 dBu Out: 24 dBu Out (12 dB pad): 12 dBu Out (18 dB pad): 6 dBu Propagation Delay: < 1.5 ms Impedance Input: 10 kOhm Output: 120 Ohm Total Harmonic Distortion: < 0.05% (20 Hz - 20 kHz; +4 dBu) Operating Voltage: 100 - 240V, 50/60 Hz Maximum Power Drain: 45 W Dimensions (HxWxD): 44 x 483 x 248 mm Weight: 2.83 kg