The Shure A56D mounts microphones on a drum or cymbal. It fits stand adapters with a 5/8-in, 27-thread. An L-adapter extension curves at a 90 angle for optimum microphone placement.
The clamp fits drum rims measuring from 1/2-in. (12.7 mm) to 2 /4 -in. (57.2 mm) in height, or on cymbal stands measuring from 3/8-in. (9.5 mm) to 1 1/8-in. (28.6 mm) in diameter.
DRUM RIM MOUNTING
CYMBAL STAND MOUNTING
NOTE: To minimize potential noise or damage, position the microphone outside the drummer’s range of stick movement and cymbal movement.
![]() RPM618 |
Clamp Assembly (A98D) |
![]() 32A866 |
Jaw |
![]() 90A4646 |
L-Adapter Extension |
![]() 31A1857 |
5/8”–27 Lock Nut (Large) |
![]() 31B1770 |
5/8”–27 Lock Nut (Small) |
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: info@shure.de