ADX series transmitters deliver impeccable audio quality and RF performance, and are equipped with ShowLink® remote control for real-time parameter adjustments and interference avoidance. This transmitter features wide tuning, High Density (HD) mode, encryption, and advanced rechargeability in a streamlined design. Light-weight aluminum construction and SB920A rechargeable power options (with dockable charging).
Component | Part number |
---|---|
SB920A Shure Rechargeable Battery | 95A46272 |
Zipper Bag | 95B2313 |
Threaded Adapter | 31B1856 |
Swivel Adapter, black | 90F4046 |
Accessory | Part number |
---|---|
SB920A Shure rechargeable battery | 95A46272 |
Battery contact cover (part number varies by frequency range) | WA619-A (470-636 MHz), WA619-B (606-810 MHz), WA619-C (750-960 MHz) |
AD651B Talk Switch Button (black) | 90A37347B |
Microphone stand adapter | WA371 |
Shure Networked Docking Charger 2-Up | SBC240 |
SM58 (RPW112)
SM86 (RPW114)
SM87A (RPW116)
BETA 58A (RPW118)
BETA 87A (RPW120)
BETA 87C (RPW122)
VP68 (RPW124)
KSM9 Nickel (RPW188)
KSM9HS Nickel (RPW190)
KSM9 Black (RPW184)
KSM9HS Black (RPW186)
KSM11 Black (RPW192)
KSM11 Nickel (RPW194)
① Microphone Cartridge
See Optional Accessories for a list of compatible cartridges.
② Display
View menu screens and settings. Press any control button to activate the backlight.
③ Infrared (IR) Port
Align with the receiver IR port during an IR Sync for automated transmitter programming.
④ Control Buttons
Use to navigate through parameter menus and change values.
⑤ Battery Compartment
Requires Shure rechargeable battery.
⑥ On/Off Switch
Powers the unit on or off.
⑦ Handle
Unscrew to access controls and batteries.
⑧ Battery Charging Contacts
Charging contacts for use with docking battery chargers.
Use to navigate through parameter menus and change values.
Control | Description |
---|---|
X | Acts as a 'back' button to return to previous menus or parameters without confirming a value change |
O | Enters menu screens and confirms parameter changes |
∨∧ | Use to scroll through menu screens and to change parameter values |
Tip: Use the following shortcuts for quick setup:
The home screen shows transmitter information and status.
There are four pieces of information that you can choose to see on the home screen. Use the arrow buttons to select one of the following choices:
The following icons indicate transmitter settings:
Icon | Setting |
---|---|
![]() |
Battery runtime in hours and minutes or bar display |
![]() |
Key: Displayed when encryption is enabled |
![]() |
Lock: Displayed when controls are locked. Icon will flash if access is attempted to a locked control (power or menu). |
![]() |
ShowLink signal strength displays 0 to 5 bars |
![]() |
STD: Standard Transmission Mode |
![]() |
HD: High Density Transmission Mode |
![]() |
RF Mute Engaged: Displayed when RF output is muted |
Lock transmitter interface controls to prevent accidental or unauthorized changes to parameters. The lock icon appears on the home screen when the interface lock is enabled.
To quickly unlock a transmitter: Press O twice, select None, and press O.
Shure lithium-ion batteries offer a rechargeable option for powering the transmitters. Batteries quickly charge to 50% capacity in one hour and reach full charge within three hours.
Single chargers and multiple bay chargers are available to recharge the Shure batteries.
Caution: Only charge Shure rechargeable batteries with a Shure battery charger.
When using a Shure rechargeable battery, the receiver and transmitter home screens display the number of hours and minutes remaining.
Detailed information for the battery is displayed Battery menu of the transmitter:
Proper care and storage of Shure batteries results in reliable performance and ensures a long lifetime.
For additional rechargeable battery information, visit www.shure.com.
① Accessing the Battery Compartment
Unscrew and remove the handle as shown.
② Inserting the Battery
Insert the battery, contracts first into the battery compartment. Press down on the tab to fully seat the battery, and then reinstall the handle.
Tip: To remove the battery, pull up on the tab on the bottom of the battery.
Note: Higher RF power levels decrease battery runtime. Battery runtime varies with battery age and environmental conditions.
2 mW | 10 mW | 40 mW |
---|---|---|
11.0 to 12.0 hours | 9.0 to 11.0 hours | 6.0 to 8.0 hours |
Note: A Battery Hot warning indicates that transmitter battery needs to cool off. Otherwise, the transmitter will shut down. Let the device cool down and then consider swapping the transmitter battery to continue operation.
Identify any possible external heat sources to the transmitter and operate the transmitter away from those external heat sources.
All batteries should be stored and operated away from external heat sources in reasonable temperature conditions for best performance.
Use battery contact covers to prevent reflections from the battery contacts during broadcasts or live performances.
The Main menu organizes the available transmitter parameters into three categories:
Freq
Press the enter button to enable editing of a group (G:) channel (C:) or frequency (MHz). Use the arrow buttons to adjust the values. To edit the frequency, press the O button once to edit the first 3 digits, or twice to edit the second 3 digits.
Power
Higher RF power settings can extend the range of the transmitter.
Note: Higher RF power settings decrease battery runtime.
Output
Sets the RF output to On or Mute.
Offset
Adjust Offset level to balance mic levels when using two transmitters for frequency diversity or when assigning multiple transmitters to receiver slots. Adjustment range: -12 dB to +21 dB.
Mute
When enabled, the power switch is configured as a mute switch for the audio:
Tone Gen
Transmitter will generate a continuous test tone:
Device ID
Assign a device ID of up to 9 letters or numbers.
Locks
Locks the transmitter controls and power switch.
Link Info
Displays the following information about the link between a transmitter and receiver:
SL Test
ShowLink test tool to measure the boundaries of ShowLink coverage.
Marker
When enabled, press the enter button to drop a marker in Wireless Workbench.
Battery
Displays battery information:
Talk Sw
Press ENTER to add control from a talk switch. Press the button on the talk switch twice to complete the link.
Identify
When enabled, Identify flashes the transmitter icon in Wireless Workbench Inventory or Monitor tabs.
About
Displays the following transmitter information:
Reset All
Restores all transmitter parameters to factory settings.
Use IR Sync to form an audio channel between the transmitter and receiver.
Note: The receiver band must match the band of the transmitter.
Note:
Any change to the encryption status on the receiver (enabling/disabling encryption) requires a sync to send the settings to the transmitter. New encryption keys for the transmitter and receiver channel are generated on every IR sync, so to request a new key for a transmitter, perform an IR sync with the desired receiver channel.
The transmitter can be manually tuned to a specific group, channel, or frequency.
RF mute prevents transmission of the audio by suppressing the RF signal. The home screen displays RF MUTED in this mode.
When a transmitter is in RF mute mode, the RF will remain muted when the power is cycled and when the battery is replaced. To restore the RF signal, return to the Output menu and select On.
Power on in Safe Start mode to prevent interference with other devices. Hold the X button while powering on your device until the Safe Start menu appears.
Safe Start menu options:
Use the navigation buttons to make changes.
To exit the Safe Start menu, cycle the power or momentarily remove the battery.
Previous settings for locks and RF will be retained when the transmitter is powered on in Safe Start.
The OVERLOAD message appears when the audio input experiences a high-level signal. The power LED turns red as an additional indicator of an overload. Reduce the input signal or enable the input pad to remove the overload condition.
Tip: To enable the input pad, navigate to -12 dB.
and selectThe transmitter contains an internal tone generator that produces a continuous audio signal. The tone is helpful when conducting a sound check or for troubleshooting the audio signal chain. The level of the tone is adjustable from -60 dB to 0 dB and the frequency can be set to 400 Hz or 1000 Hz.
Always start with the level set to -60 dB to avoid overloading speakers or headphones.
Turn off the tone by selecting Off from the menu or by cycling the transmitter power.
When linking two or more transmitters to a receiver, there may be a difference in volume levels between microphones or instruments. If this occurs, use the Offset function to match the audio levels and eliminate audible volume differences between transmitters. If using a single transmitter, set Offset to 0 dB.
The ShowLink Test is a tool to find the boundaries of the ShowLink coverage area. When the ShowLink test is activated, a five-bar display indicating the link quality is shown on the screen. As the transmitter moves away from the access point, the number of bars will decrease. ShowLink control is maintained as long as 1 bar is displayed.
If the transmitter is beyond the coverage range, ShowLink control will not be possible. However, the audio signal will not be affected or interrupted as long as the transmitter is within range of the RF signal.
To improve coverage, adjust the location of your access points or place additional access points to extend coverage.
To activate the ShowLink Test:
Tip: During a ShowLink test, press O (enter) to drop a marker in Wireless Workbench.
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional features and enhancements. To take advantage of design improvements, you can upload and install new versions of the firmware by using the Shure Update Utility, available on the Shure Update Utility page.
When performing an update, first download firmware to the receiver, and then update transmitters to the same firmware version to ensure consistent operation.
The firmware numbering for Shure devices uses the following format: MAJOR.MINOR.PATCH (e.g., 1.2.14). At a minimum, all devices on the network (including transmitters), must have the same MAJOR and MINOR firmware version numbers (e.g., 1.2.x).
Tip: The red alignment LED will turn on when the alignment is correct.
Issue | See Solution... |
---|---|
No sound | Power, Cables, Radio Frequency, or Encryption Mismatch |
Faint sound or distortion | Gain, Cables |
Lack of range, unwanted noise bursts, or dropouts | Radio Frequency (RF) |
Cannot turn transmitter off or change frequency settings, or can't program receiver | Interface Locks |
Encryption Mismatch message | Encryption Mismatch |
Firmware Mismatch message | Firmware Mismatch |
Transmitter Battery Hot message | Tx Battery Hot |
Antenna Fault Red LED | RF |
Handheld transmitter shuts down during use | Clean Battery Contacts |
Make sure that the receiver and transmitter are receiving sufficient voltage. Check the battery indicators and replace the transmitter batteries if necessary.
Adjust the system gain on the front of the receiver. Ensure the output level on the back of the receiver corresponds to the mic/line input setting of the mixing console, amplifier, or DSP.
Check that all cables and connectors are working correctly.
The transmitter and the receiver can be locked to prevent accidental or unauthorized changes. A locked feature or button will produce the Locked screen on the LCD panel or the lock icon will flash on a transmitter.
Re-sync all receivers and transmitters after enabling or disabling encryption.
Paired transmitters and receivers must have the same firmware version installed to ensure consistent operation. See Firmware topic for firmware update procedure.
If the transmitter battery does not cool off, the transmitter will shut down. Let the device cool down and then consider swapping the transmitter battery to continue operation.
Identify any possible external heat sources to the transmitter and operate the transmitter away from those external heat sources.
All batteries should be stored and operated away from external heat sources in reasonable temperature conditions for best performance.
If neither blue RF Diversity LED is illuminated, then the receiver is not detecting the presence of a transmitter.
The orange RF Signal Strength LEDs indicate the amount of RF power being received. This signal could be from the transmitter, or it could be from an interfering source, such as a television broadcast. If more than two of the orange RF LEDs are still illuminated while the transmitter is off, then that channel may be experiencing interference, and you should try a different channel.
The red RF LED indicates RF overload. Overloads have the potential to cause interference in multiple system installations. If you are experiencing an overload, turn off the receiver to see if it is causing interference with other components.
The numerical channel select button also turns red to indicate interference.
If the transmitter is more than 6 to 60 m (20 to 200 ft) from the receiver antenna, you may be able to increase range by doing one of the following:
If you see the red RF LED on a receiver, try the following:
The Antenna Fault red LED indicates a short circuit condition or excessive load at an antenna port.
Clean the battery contacts with an electrical contact cleaner designed for gold contacts and safe on plastics.
-12 to 21 dB (In 1 dB steps)
Shure SB920A Rechargeable Li-Ion
@ 10 mW
Shure SB920A | up to 9 hours |
See Battery Runtime Chart
254 mm x 51 mm (10.0 in. x 2.0 in.) L x Dia.
338 g (11.9 oz.), Without Battery
Cast Aluminum
-18°C (0°F) to 50°C (122°F)
Note: Battery characteristics may limit this range.
-29°C (-20°F) to 74°C (165°F)
Note: Battery characteristics may limit this range.
Unbalanced
1 kHz at 1% THD
145 dB SPL (SM58), typical
Note: Dependent on microphone type
Dual Band Helical
<200 kHz
Standard Mode | 350 kHz |
High Density Mode | 125 kHz |
varies by region
Shure Axient Digital Proprietary
2 mW, 10 mW, 40 mW
See Frequency Range and Output Power table, varies by region
< 0.19 W/kg
IEEE 802.15.4
Zigbee Dual Conformal
2.40 to 2.4835 GHz ( 24 Channels)
10 dBm (ERP)
varies by region
Band | Frequency Range ( MHz) | Tx RF Power ( mW)*** |
---|---|---|
G53 | 470 to 510 | 2/10/40 |
G54 | 479 to 565 | 2/10/20 |
G55† | 470 to 636 | 2/10/40 |
G56◇ | 470 to 636 | 2/10/40 |
G57△ | 470 to 616* | 2/10/40 |
G62 | 510 to 530 | 2/10/40 |
H54 | 520 to 636 | 2/10/40 |
K53† | 606 to 698 | 2/10/40 |
K54△ | 606 to 663** | 2/10/40 |
K55 | 606 to 694 | 2/10/40 |
K56 | 606 to 714 | 2/10/40 |
K57 | 606 to 790 | 2/10/40 |
K58 | 622 to 698 | 2/10/40 |
L54 | 630 to 787 | 2/10/40 |
L60 | 630.125 to 697.875 | 2/10/40 |
P55 | 694 to 703, 748 to 758, 803 to 806 | 2/10/40 |
R52 | 794 to 806 | 10 |
JB | 806 to 810 | 2/10 |
X55 | 941 to 960 | 2/10/40 |
X56 | 960 to 1000 | 2/10/40 |
*With a gap between 608 to 614 MHz.
**With a gap between 608 to 614 MHz and a gap between 616 to 653 MHz.
***Power delivered to the antenna port.
†Operation mode varies according to region. In Brazil, High Density mode is used. The maximum power level for Peru is 10mW.
△Output power limited to 10 mW above 608 MHz.
◇Korea defines power as conducted (ERP) which is 1dB less then declared in table.
เครื่องโทรคมนาคมและอุปกรณ์นี้มีความสอดคล้องตามมาตรฐานหรือข้อกำหนดทางเทคนิคของ กสทช.
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel |
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich |
---|---|
A, B, BG, CH, CY, CZ, D, DK, EST, F | * |
FIN, GB, GR, H, HR, I, IRL, IS, L, LT | * |
M, N, NL, P, PL, RO, S, SK, SLO, TR | * |
all other countries | * |
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel |
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich |
---|---|
A, B, BG, CH, CY, CZ, D, DK, EST, F | * |
FIN, GB, GR, H, HR, I, IRL, IS, L, LT | * |
M, N, NL, P, PL, RO, S, SK, SLO, TR | * |
all other countries | * |
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
Country Code Code de Pays Codice di paese Código de país Länder-Kürzel |
Frequency Range Gamme de frequences Gamme di frequenza Gama de frequencias Frequenzbereich |
---|---|
A, B, BG, CH, CY, CZ, D, DK, EST, F | * |
FIN, GB, GR, H, HR, I, IRL, IS, L, LT | * |
M, N, NL, P, PL, RO, S, SK, SLO, TR | * |
all other countries | * |
* This equipment may be capable of operating on some frequencies not authorized in your region. See Licensing Information.
Please follow your regional recycling scheme for batteries, packaging, and electronic waste.
No user-operated control of power, frequency, or other parameters are available beyond those specified in this operating manual.
Note: Use only with the included power supply or a Shure-approved equivalent.
WARNING:This device operates under an ACMA class licence and must comply with all the conditions of that licence including operating frequencies.
低功率射頻器材技術規範
取得審驗證明之低功率射頻器材,非經核准,公司、商號或使用者均不得擅
自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之使用
不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並
改善至無干擾時方得繼續使用。前述合法通信,指依電信管理法規定作業之
無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻
射性電機設備之干擾。
Certified under FCC Part 15 and FCC Part 74.
Certified by ISED in Canada under RSS-210.
FCC ID: DD4ADX2G57, DD4ADX2K54, DD4ADX2X55. IC: 616A-ADX2G57, 616A-ADX2K54.
Meets essential requirements of the following European Directives:
Note: Please follow your regional recycling scheme for batteries and electronic waste
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
Hereby, Shure Incorporated declares that this product with CE Marking has been determined to be in compliance with European Union requirements. The full text of the EU declaration of conformity is available at the following site: https://www.shure.com/en-EU/support/declarations-of-conformity.
Authorized European Importer:
Shure Europe GmbH
Department: Global Compliance
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: EMEAsupport@shure.de
Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements. Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless microphone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction manual, may cause interference with radio and television reception.
Notice: The FCC regulations provide that changes or modifications not expressly approved by Shure Incorporated could void your authority to operate this equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device operates on frequencies shared with other devices. Consult the Federal Communications Commission White Space Database Administration website to determine available channels in your area prior to operation.
This device operates on a no-protection, no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio licence is required. For further details, consult Innovation, Science and Economic Development Canada’s document Client Procedures Circular CPC-2-1-28, Voluntary Licensing of Licence-Exempt Low-Power Radio Apparatus in the TV Bands.
Ce dispositif fonctionne selon un régime de non‑brouillage et de non‑protection. Si l’utilisateur devait chercher à obtenir une certaine protection contre d’autres services radio fonctionnant dans les mêmes bandes de télévision, une licence radio serait requise. Pour en savoir plus, veuillez consulter la Circulaire des procédures concernant les clients CPC‑2‑1‑28, Délivrance de licences sur une base volontaire pour les appareils radio de faible puissance exempts de licence et exploités dans les bandes de télévision d’Innovation, Sciences et Développement économique Canada.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :