Headphones automatically enter pairing mode when you power them on the first time or when they have not been previously paired with this audio source.
Headphones automatically pair with previously paired devices when you power them on. After a few seconds you will hear “Connected”.
Note: If the pairing fails on the first attempt, repeat the process from the beginning.
To customize the listening features with your device, download the free ShurePlus™ PLAY app for iOS and Android.
|Accensione||Premete e tenete premuto, 2 secondi|
|Spegnimento||Premete e tenete premuto, 2 secondi|
|Controllo stato della batteria||Doppia pressione (notifica acustica dello stato)|
|Avvio/pausa||Premete una volta|
|Traccia successiva||Doppia pressione|
|Traccia precedente||Tripla pressione|
|Avvio/fine chiamata||Premete una volta|
|Rifiuto chiamata||Premete e tenete premuto, 2 secondi|
|Attivazione assistente vocale||Tripla pressione|
|Ripristino impostazioni di fabbrica||
|Aumento del volume||Premete +|
|Diminuzione del volume||Premete -|
|Modalità ambiente||Spingete l’interruttore verso l’alto|
|Cancellazione attiva del rumore||Spingete l’interruttore verso il basso|
|Associazione Bluetooth||Rosso e blu alternati|
|Bluetooth connesso||Blu per 2 secondi, poi spento|
|Connessione Bluetooth persa||Blu lampeggiante lento|
|Batteria scarica||Rosso lampeggiante lento|
The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files with your iOS or Android mobile device using the music tab. Use built-in Shure EQ presets to customize the sound, or create your own EQ presets in the settings tab. Unlock environment mode and ANC features by connecting to Shure wireless and True Wireless products in the device tab.
Environment mode allows you to accentuate the ambient noise around you. This is especially useful when you want to listen to music or are on a phone call, yet you still want to be aware of the sounds around you.
To use environment mode, push the vertical switch on the back of the right earcup to the up position.
In the ShurePlus PLAY app, you can adjust the environment mode across ten levels:
Active Noise Cancellation (ANC) allows you to suppress some or all of the noise around you. This is especially useful when travelling where road noise in a car, bus, or train, or jet noise in an airplane can force you to increase the volume.
To use ANC, push the vertical switch on the back of the right earcup to the down position.
In the ShurePlus PLAY app, you can adjust the ANC between two levels:
The ShurePlus PLAY Mobile Listening App is a high-resolution music player with advanced EQ controls. Play uncompressed audio files and use built-in Shure EQ presets to control the sound. Or customize your own presets by manually adjusting the frequencies.
Use portrait mode to easily select and adjust frequency, gain, and bandwidth.
Use landscape for a close-up view of your EQ curves.
Use presets to quickly access commonly used listening profiles. Five selectable 4-band equalizer presets optimize settings for gain, equalization, and compression. Play a song and find the preset that you think suits the song best. Then adjust levels as needed.
|Use to reduce sibilance in speech.|
|Listen to your unprocessed tracks. The equalizer is bypassed for an unchanged frequency response.|
|Accentuate the bass and treble frequencies to make the overall sound feel louder.|
|Raise or lower the bass frequencies.|
|Emphasize the vocal range.|
Firmware is embedded software in each component that controls functionality. Periodically, new versions of firmware are developed to incorporate additional features and enhancements. To take advantage of design improvements, download new versions of the firmware when prompted.
When a new update is available, a notification will appear. You can update when prompted or click Later to install firmware from the settings menu at a later time.
Tip: Follow these guidelines for the most reliable update.
The headphones can also use two different cables to access audio instead of using the wireless feature:
Pulite le cuffie servendovi di un panno morbido e umido.
ATTENZIONE: non usate detergenti che contengono solventi. Impedite l’ingresso di liquidi e corpi estranei nelle aperture del driver.
Store headphones in protective case when not in use.
|REPL SBH2350 CASE ONLY||RPH-SBH2350-CASE|
|REPL USB-C to USB-A CABLE 1M||RPH-CABLE-USB|
|REPL 2.5-3.5MM CABLE 1.5M||RPH-CABLE-AUDIO|
|SBH2350 REPLACEMENT EARPADS (BLACK)||SBH2350-BK-PADS|
|SBH2350 REPLACEMENT EARPADS (DARK BROWN)||SBH2350-BR-PADS|
Magnete al neodimio, dinamico
20 - 22,000 Hz
ad 1 kHz
ad 1 kHz
334 g (11,8once)
0°C - 45°C (32°F - 113°F)
-10°C - 45°C (14°F - 113°F)
2402 MHz-2480 MHz
+4 dBm (EIRP)
aptX, aptX HD, aptX Low Latency, SBC, AAC, LDAC