General Description

The Shure® MV88+ Video recording app provides instant video recording with uncompressed audio for your mobile device. Customize the sound with digital signal processing (DSP) preset modes, adjustable gain, and stereo width control.

Features

  • Compatible with iOS, Android, PC and Mac devices.

    Note: See https://www.shure.com/MOTIVcompatibility for information on recommended Android devices.

  • Plug-and-Play Operation supporting landscape and portrait recording
  • Flexible Recording Control includes gain adjustment settings
  • Support for mono and stereo audio devices
  • When used with MOTIV microphones, preset modes are available for a variety of recording situations.

Tip: Turn on Airplane Mode and Do Not Disturb to prevent interruptions to the recording caused by phone calls, text messages, or alerts.

Standby Mode

① Menu Tap the menu to access general app settings or to open the about window for version information, help materials, and send feedback.

② Connected Device Status/Recording Length/Focus Lock Status will display the model name of the connected MOTIV device. Recording length is displayed in hours, minutes, and seconds. See the Visual Settings topic for more information on focus and exposure.

③ Device Status Displays remaining battery life and available storage space for your recording device.

④ File Information Displays video format options.

  • Audio file type: WAV, ALAC, AAC 96, AAC 128, AAC 256.
  • Sample rate: 44.1 kHz, 48 kHz.
  • Video resolution: 720p, 1080p, 4K.
  • Frame rate: 24 fps, 30 fps, 60 fps.

⑤ Reverse Camera Use the front-facing camera to shoot selfie videos.

⑥ Mic Setup Access advanced microphone settings. See Mic Setup section for more information.

⑦ Record/Stop Button

⑧ Flash Use the flash when recording in low light situations.

⑨ Preview Window Tap to review the most recently recorded video.

⑩ Grid/Level/Off Display Tap through to display grid lines or a level for easy image composition. Or turn this feature off if you prefer a clean display.

⑪ Zoom Level Adjust your zoom level for a closer view of your subject.

⑫ Input Meter/Microphone Gain Tap the input meter to bring up the mic gain slider. Tap to adjust microphone gain during recording to match the volume of the sound source. Make live adjustments to ensure levels are in the target range (indicated by the shaded region of the input meter). Displays the strength of the mono or stereo input signal.

Note: Display will read AGC when using the app with the built-in microphone. Automatic Gain Control (AGC) adjusts levels to ensure consistent volume. Weaker signals are boosted and stronger signals are attenuated to control gain. The dynamic range is decreased but the result is a more even recording.

Record Mode

① Menu Select the menu to access general app settings and the About window for version information.

② Connected Device Status/Recording Length/Focus Lock Status will display the model name of the connected MOTIV device. Recording length is displayed in hours, minutes, and seconds. See the Visual Settings topic for more information on focus and exposure.

③ Device Status Displays remaining battery life and available storage space for your recording device.

④ Record/Stop Button Start and stop video recording.

⑤ Flash Use the flash when recording in low light situations.

⑥ Photo Capture still photos during video recording. Photos get added to the recording device camera roll.

⑦ Grid Use the grid lines to assist in composing your image.

⑧ Audio Recording The MOTIV Video App displays the waveform of the audio as it is recording.

⑨ Zoom Level Adjust your zoom level for a closer view of your subject.

⑩ Input Meter Displays the strength of the mono or stereo input signal. Tap to adjust microphone gain during recording. The loudest peaks should reach within the target range (indicated by the shaded region of the input meter).

Note: The maximum file size for a recording is 2GB, which will result in approximately 2 hours of record time. This limitation was put in place to maximize app performance. Continuous recording for more than 2 hours will generate a second file.

Using the Shure MOTIV App with the MV88+ microphone

The Shure MOTIV app controls microphone settings to optimize performance for specific uses. The device stores the most recently used settings for quick setup each time you record.

Aiming the Microphone

The following suggestions are for typical use cases. Keep in mind that there are many effective ways to record a source. Experiment with horizontal or landscape orientation, microphone placement and settings to find what works best for you.

Portrait (Vertical)

Position your recording device so you can monitor the recording. Aim the front of the microphone toward the source, with left and right sides facing the appropriate directions.

Landscape (Horizontal)

Aim the front of the microphone toward the source. Ensure that the left and right sides of the microphone barrel are facing the appropriate sides.

Video Interview

  • To record audio from on-camera audio only, select the CARDIOID polar pattern and point the microphone toward your subject.

  • To capture the voices of both the on-camera subject and the off-camera interviewer, select the MONO BIDIRECTIONAL polar pattern in the app. Position the microphone with the left and right sides facing each person.

Self-Recording (Video Streaming)

Set the device on a flat surface and angle the microphone toward your mouth. Select the MONO CARDIOID preset in the Shure MOTIV app to reduce ambient noise.

Handheld Recording

The legs collapse to create a portable hand-held stand.

Mic Setup

① Header Tap Close to return to the record window. Toggle between Locked and Unlocked options to prevent accidental bumps or finger taps from changing your sound and to lock in your mic gain, presets and advanced settings. When mic settings are Locked, the setting screen is grayed out. The line above the input meter displays the connected microphone and indicates which effects are in use and recording status.

② Input Meter Displays the strength of the input signal and whether that signal is mono or stereo. The loudest peaks should reach within the target range (indicated by the shaded region).

③ Microphone Gain/Monitor Mix Adjust the mic gain slider to match the volume of the sound source. Levels are in the target range when they peak in the shaded region of the input meter. Tap the oval button to access monitor mix settings. See the monitor mix section for information on making monitoring adjustments.

④ Preset Modes Select a mode to set stereo width, equalization, and compression for specific applications. Refer to the "Preset Modes" topic for more details.

⑤ Polar Pattern Selection Swipe to choose between Stereo, Mono Cardioid, Mono Bidirectional or Raw Mid-Side pick-up patterns. Then adjust the width of the stereo microphone pickup area.

Tip: Consider the location of the microphone and the size of the sound source when adjusting the width. For example, a large orchestra or ensemble recording will benefit from a wide stereo image to achieve increased separation between instruments. Other applications, such as speech, benefit from a narrow width for improved clarity with rejection of ambient (room) sound.

⑥ Advanced Features Fine tune your audio recording with limiter and compressor controls, high pass filter, left-right swap, and equalization settings. Your settings will be retained in the microphone. See "Wind Noise Reduction" and "Left-Right Channel Swap" for more details on these topics.

  • Limiter: Use the Limiter to control volume peaks by setting an input threshold.
  • Compressor: Use the Compressor when your sound source is very dynamic. The compressor will narrow the dynamic range; quiet signals are boosted and loud signals are lowered. There are light and heavy compression options available.
  • Equalizer: Use the Equalizer to boost or cut bands of frequencies to improve sound clarity. The EQ icon in the Mic Setup screen displays user-selected equalization.

Preset Modes

Five selectable modes optimize settings for gain, stereo width, equalization, and compression. Set the microphone level and try the modes to find which sounds best. Preset modes can affect the strength of the input signal, so adjust the microphone level as needed after changing presets.

Mode Application Characteristics
Speech
speech Narrow stereo width to reject background noise, equalization that emphasizes clarity and fullness, and gentle compression.
Singing
solo or group vocal performances Medium stereo width with subtle equalization to add richness and clarity for a natural sound.
Flat
any An unprocessed signal (no equalization or compression settings used). Adds flexibility when processing the audio after recording.
Acoustic
acoustic instruments and quiet music Medium stereo width with transparent compression to smooth out volume spikes and bring out quiet passages. The equalizer setting emphasizes detail and an overall natural sound.
Band
live performance and louder sources Wide stereo to increase separation between sources. Equalization further improves definition by reducing frequencies that can make the instrumentation sound crowded.

MV88+ Outputs

  • 3.5mm monitor output for connecting to headphones and earphones
  • Send audio to your recording device using the micro-B USB port

MV88+ LEDs

iOS Android/Mac/PC
Green: Mic active, audio flowing Green: Power is on
Amber: Error
Flash Amber: Firmware is updating
Red: Microphone is muted
Flash Red: Audio is clipping

Monitor Mix Blend

Tap the Monitor Mix button to view monitoring controls.

Use the monitor mix slider to determine how much of each input you hear. For best results, start monitoring at the midpoint and adjust.

  • Move the slider towards the microphone icon (MIC) to hear more of the currently recorded audio.
  • Move the slider towards the device icon (PLAYBACK) to hear more of the previously recorded audio.

Left-Right Channel Swap

For stereo recordings, use Left - Right Swap to flip the left and right audio channels to match the stereo image to the video. For example, when using video to record yourself.

Tip: Use the L and R indicators on the microphone barrel. This way you can set Left - Right Swap before you start to record.

Recording Tips

Turn Off Notifications

When you open the MOTIV app, a message prompts you to enable airplane mode and do not disturb mode. It's important to do this to avoid recording interference from phone calls, messages, and various notifications which can add static to your recordings.

Note: Enable airplane mode and then turn Wi-Fi back on to add geolocation information to your audio file.

Adjust your Sample Rate

Select a lower sample rate when it is useful to have a smaller file, for example, when recording speech or a podcast for download. Select a higher sample rate for music and dynamic recordings.

Record in Mono

Record in mono to increase your available record time or when recording a single source, like vocals, that would benefit from less ambient noise. Select the Mono Cardioid or Mono Bidirectional polar pattern and audio from all capsules are summed to a single channel. The input meter will indicate mono recording by displaying the top half of the waveform. MOTIV supports third-party microphones with mono recording.

Record in Stereo

Rotate the MV88+ barrel in the mic clip to accommodate portrait or landscape recording. L and R are labeled to show stereo orientation of the microphone. The stereo image is accurate if the Shure logo is facing upward.

Capture the Complete Performance

To ensure that you capture the entire sound source, start your recording before the performance starts and edit the recording later to trim any silence.

Note: If your microphone accidentally becomes disconnected during recording, MOTIV will automatically stop the recording. The save file dialog will appear, prompting you to name and save your audio.

Record with Confidence with Automatic Save

If your microphone accidentally becomes disconnected during recording, MOTIV will automatically stop the recording. The save file dialog will appear, prompting you to name and save your audio.

Sharing MOTIV Recordings

Videos created by the MOTIV Video app can be shared from the MOTIV camera roll folder in your recording device.

Troubleshooting

Issue Solution
Microphone is plugged in, but the volume meter does not register a signal. Edit the privacy setting for your recording device under SETTINGS > PRIVACY > MICROPHONE to give the app permission to use the microphone.
Microphone is plugged in, but not detected. Unplug and reconnect the cable connectors so that the app recognizes the microphone. You'll know that the connection is secure when you see the microphone name visible in the status bar.
You hear no audio despite LEDs and the volume meter responding as if audio is present. Check the Monitor Mix blend to ensure that audio is passing and you can monitor playback. Move the Monitor Mix slider to the center to hear audio that is being currently recorded and previously recorded audio.
Audio sounds bad or distant. To ensure that you are receiving audio from the attached microphone and not a built-in microphone; unplug and reconnect the mic. You'll know that the connection is secure when you see the microphone name visible in the status bar.
Audio is distorted Use the audio meter to ensure that volume peaks are within the target range (the gray area). If the level reaches the red peak indicator of the input meter, turn the gain down.
Left/right stereo channels do not match video Depending on the orientation of the recording device, it may be necessary to engage the Left-Right swap in MOTIV settings. If the audio has already been recorded, you can switch the left and right channels in most audio editing software.

Note: It may be useful to reset the app to restore functionality. Perform a hard reset by unplugging and re-plugging the microphone.

System Requirements

System Requirements and Compatibility: iOS

  • iOS: iOS 11.3 and higher
  • iPhone: iPhone 6 and higher
  • iPod Touch: 5th gen

System Requirements and Compatibility: Android

Will work with any Android device that has:

  • Android Marshmallow 6.0 and higher
  • USB Host Power Requirement of ≥100 mA
  • USB Audio Class 1.1 support

Android is a trademark of Google Inc.

Specifications 

MFi Certified

Yes

DSP Modes (Presets)

Speech/Singing/Acoustic/Loud/Flat

Polar Pattern

Adjustable Width Stereo/Mono Bidirectional/Mono Cardioid/Mid-Side

Stereo Principle

Mid-Side

Frequency Response

20 Hz to 20,000 Hz

Adjustable Gain Range

0 to +36 dB

Sensitivity

-37 dBFS/Pa at 1 kHz [1] [2]

Maximum SPL

120 dB SPL [2]

Limiter

Yes

Compressor

Yes

Equalizer

5-band

[1]1 Pa=94 dB SPL

[2]At Minimum Gain, Flat Mode

Bit Depth Sampling Rate
24 48  kHz
24 44.1  kHz
16 48  kHz
16 44.1  kHz

Certifications

Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)

Note: Testing is based on the use of supplied and recommended cable types. The use of other than shielded (screened) cable types may degrade EMC performance.

This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.

The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance

Authorized European representative:

Shure Europe GmbH

Headquarters Europe, Middle East & Africa

Department: EMEA Approval

Jakob-Dieffenbacher-Str. 12

75031 Eppingen, Germany

Phone: +49-7262-92 49 0

Fax: +49-7262-92 49 11 4

Email: info@shure.de

Made for iPhone X, iPhone 8 Plus, iPhone 8, iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad Pro (10.5-inch), iPad Pro (12.9-inch) 2nd generation, iPad Pro (12.9-inch) 1st generation, iPad Pro (9.7-inch), iPad mini 4, iPad mini 3, iPad mini 2, iPad Air 2, iPad Air, iPad (6th generation), iPad (5th generation), iPad (4th generation), iPod touch.

iPad, iPhone, iPod, and iPod touch are trademarks of Apple Inc.,registered in the U.S. and other countries. iPad Air, iPad mini, and Lightning are trademarks of Apple Inc. The trademark “iPhone” is used in Japan with a license from Aiphone K.K.

PIXI® and Manfrotto® are registered trademarks of Vitec Imaging Solutions. Mini tripod maximum weight: 1Kg/2.2 lbs.