This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel. The safety certifications do not apply when the operating voltage is changed from the factory setting.
Energy-efficient external switching mode AC/DC power supply, for use with Shure products world-wide.
|Input||100–240V AC, 50–60 Hz|
|Current Drain (maximum)||150 mA||250 mA||1.3 A||400 mA||0.2 A||1.6 A|
|Output||12V DC, 400 mA||15V DC, 600 mA||15V DC, 4.0 A||5.5V DC, 2.72 A||5V DC, 1.0 A||48V DC, 3.1 A|
|Operating Temperature Range||0°C (32°F) to 40°C (104°F)|
Meets requirements of the California Energy Commission: CEC-400-2010-012: December 2010.
Approved per Australian Standard requirements of AS/NZS 4665.1:2005 and AS/NZS 4665.2:2005.
Listed per safety standard ANSI/UL 60065, CAN/CSA 22.2 E60065, EN60065, and AS/NZS60065.
Conforms to the relevant requirements of regulation (EC) No.278/2009, for low voltage external power supplies.
Industry Canada ICES-003 Compliance Label: CAN ICES-3 (B)/NMB-3(B)
This product meets the Essential Requirements of all relevant European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.