The VP64A and VP64AL are high-output omnidirectional handheld dynamic microphones designed for professional audio and video production. They combine exceptional performance and comfortable feel with a handsome on-camera appearance.
The VP64A and VP64AL are identical except for handle length. The 200 mm (7-7/8 inch) long VP64A is ideal for closeup use and can be used outside as well as indoors. The VP64AL is well-suited to location interviews, sports broadcasting, and other situations where the 244 mm (9-5/8 inch) length is an advantage.
The omnidirectional pickup pattern provides uniform pickup on or off axis, eliminating the need for critical microphone positioning. The VP64A microphones also feature a tailored frequency response with an upper midrange presence rise that adds crispness and clarity to speech. The cartridge utilizes a neodymium magnet for higher output and increased signal-to-noise ratio.
An internal rubber isolation mount protects the microphone cartridge and minimizes handling noise. A water-resistant mesh grille allows the microphone to be used during the most challenging weather conditions. The supplied windscreen further reduces “pop” and wind noise.
Dynamic (moving coil)
Omnidirectional
Low (300 Ω actual)
Open Circuit Voltage: -51.5 dBV/Pa (2.7 mV)
1 Pascal=94 dB SPL
50 to 12,000 Hz
Figure 1: Typical Frequency Response
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3. See Figure 2)
Figure 2: Internal Connections
VP64A: 158 g (5.6 oz)
VP64AL: 179 g (6.33 oz)
Eligible to bear CE Marking. Conforms to European EMC Directive 89/336/EEC. Meets applicable tests and performance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments.
The CE Declaration of Conformity can be obtained from: www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: +49-7262-92 49 0
Fax: +49-7262-92 49 11 4
Email: info@shure.de
Microphone Clip for AMS26, BETA181, KSM137, KSM141, MX412, MX418, MX412S, MX418S, MX412SE, MX418SE, SM62, SM63, SM63L, SM63LB, SM81, VP64, VP64A, VP64AL and standard microphone stands | A57F |
Windscreen | 49A130 |
25 foot (7.5m) Triple-Flex® Microphone XLR Cable with Switchcraft connectors | C25E |
Isolation Mount/Swivel Adapter for KSM109, KSM137, KSM141, SM63, SM81, SM94 and VP64 | A53M |
Carrying/Storage Bag | 26A13 |
Cartridge for VP64A and VP64AL | R199 |
Screen | 37A186B |
Cartridge Housing Ring (VP64A) | 31C1605A |
Cartridge Housing Ring (VP64AL) | 31C1605B |
Plug Element | 90C1984 |
For additional service or parts information, please contact Shure's Service department at 1-800-516-2525. Outside the United States, please contact your authorized Shure Service Center.